9200HD
HIGH DEFINITION
SATELLITE & TERRESTRIAL RECEIVER

       
               
   

         
                           
 
Specifications      
       
       
               
  Front-End              
  1 Input Connector F-type,IEC 169-24      
  IF Input Frequency 950MHz to 2150MHz      
  IF Loop Throughout 950MHz to 2150MHz      
  Input Level    -65 dBm~-25 dBm      
  LNB Power   13 /18VDC / 500mA Max    
  DiSEQqC Control 1.0, 1.2 & USALS Compatible    
  Band Switch   22KHz Tone(22 +/- 4KHz. Amplitude : 0.6 +/- 0.2V)      
  Modulation Method   DVB-S QPSK, LDPC/BCH(DVB-S2) 8PSK/QPSK (Option)        
  Symbol Rate   DVB-S QPSK : 1-45Msps, LDPC/BCH(DVB-S2) 8PSK/QPSK : 10-30Msps (Option)    
  Viterbi Decoding Rate 1/2, 2/3, 3/4, 5/6 and 7/8    
  Bandwidth 36MHz      
  LDPC/BCH Punctured Code. 1/2, 2/3, 3/4, 3/5, 4/5, 5/6, 8/9, 9/10 in DVB-S2    
  Terrestrial Tuner ATSC A/53 compliant 8/16VSB and MMDS 2/4/8VSB receiver, ITU-U J.83 Annex B/C, SCTE DVS-031 compliant 64/256QAM receiver      
               
  MPEG transport Stream  A/V Decoding          
  Demultiplex   According to ISO/IEC 13818-1(MPEG-2 system)    
  Input syream   Max. 90Mbit/s      
  Aspect Ratio   4:3(default), 16:9 letterbox        
  Video Resolution 480p or 720p, 1080i    
  Audio Decoding ISO/IEC13818-3(MPEG2 Audio/MUSICAM), Dolby AC-3      
  Audio Mode   SingleChannel/Dual Channel, Stereo, Joint Stereo
  Video Output HDMI/HDCP,RCA    
               
  Microprocessor & Memories            
  Main Processor ARM926      
  CPU Clock   280MIPS        
  Flash Memory 8 Mbyte        
  SDRAM   128 Mbyte      
  EEPROM   32 Kbit        
               
  Data port              
  Connector   9 Pin D-Sub Type      
  Protocol   RS232 Asynchronous    
  Data Rate   Max. 19.2Kbps 115.2K      
               
  A/V output              
  Digital output   HDMI/HDCP, YPbPr      
  Video RCA   1 output    
  Audio RCA 2 output        
  Digital Audio   1 optical output S/PDIF        
               
               
  Front Panel              
  Smart Card Slot (Optional)    1 Embedded Slot    
  8 keys   Power, Channel Up/Down, Volume Up/Down, Menu, Exit, OK
  USB USB2.0 Host        
  4 Digits LED Channel Number Display         
               
  Rear Panel              
  IF Input   F-type Connector      
  IF Loopthrough output F-type Connector      
  6RCA Video, Audio L, Audio R, YPbPr    
  Modulator F-type         
  S/PDIF Optical         
  S-Video            
  HDMI Type A         
  RS232 Serial Port 9 Pin D-Sub Type      
  UHF Optional U-30 Kit Signal In ATSC RF Signal Input      
  eSATA Port For External HDD      
               
  Remote Control              
  Type   Universal II remote      
  Battery   2x1.5V AAA Type      
               
  Electrical and Mechanical            
  Input Voltage   AC 90 -250V, 50/60Hz      
  Power Consumption Max. 45 Watts      
  Size(WxHxD)   340x245x65mm       
  Weight   2.5kg