Pansat 250SM Back

       
               
   

 

         
                           
 
Specifications      

PANSAT 250SM

       
       
  Embedded Smart Card Slot   1 Smart Card Reader      
  USB2.0 with On-The-Go   1 Host         
               
  Front-End              
  1 Input Connector F-type, IEC 169-24      
  IF Input Frequency 950MHz to 2150MHz      
  IF Loop Throughout 950MHz to 2150MHz      
  IF Frequency   Zero-IF        
  Input Level    -65 dBm~-25 dBm      
  LNB Power   13 /18VDC / 500mA Max    
  DiSEQqC Control Diseqc 1.2 & USALS Compatiable    
  Band Switch   22KHz Tone      
  Demodulation   QPSK        
  Symbol Rate   1~45 Msps(SCPC,MCPC)    
  Viterbi Decoding Rate 1/2,2/3,3/4,5/6 and 7/8    
  Reed Solomon Decoding FEC: 204, 188. t=8      
               
  MPEG transport Stream  A/V Decoding          
  Demultiplex   According to ISO/IEC 13818-1    
  Input syream   Max. 90Mbit/s      
  Aspect Ratio   4:3, 16:9        
  Video Resolution 720x576 (PAL), 720X480 (NTSC)    
  Audio Decoding MPEG Layer l & ll      
  Audio Mode   Single Channel /Dual Channel, Stereo, Joint Stereo
  Audio Sampling Frequency 16/22, 05/24/32/41, 1/48 khz    
               
  Microprocessor & Memories            
  Main Processor VIRGO SE      
  CPU Clock   150 MHz        
  Flash Memory 8 Mbyte        
  SDRAM   32 Mbyte      
  EEPROM   256 Kbit        
               
  Data port              
  Connector   9 Pin D-Sub Type      
  Protocol   RS232 Asynchronous    
  Data Rate   Max. 19.2Kbps      
               
  RF Modulator              
  Connector   IEC 169-24      
  Frequency   CH3 (61.25MHz), CH4 (67.25 MHz)    
  Output Channel CH 3-4        
  TV Standard   NTSC        
               
               
  Front Panel              
  4 Digits LED    Channel Number Display    
  8 keys   Volume Up/Down, Channel Down/Up, OK, Power, Menu, Exit
  Smart Card Interface 1 Slot        
  USB Memory Stick Slot(Max. 500mA) 1 Host         
               
  Rear Panel              
  IF Input   F-type Connector      
  IF Loopthrough output F-type Connector      
  6 Phone (Cinch) Video, Audio L, Audio R, YPbPr    
  S/PDIF Optical          
  S-VHS            
  UHF            
  Modulator      
  RS232 Serial Port 9 Pin D-Sub Type      
               
  Remote Control              
  Type   IR Remote      
  Battery   2x1.5V AAA Type      
               
  Electrical and Mechanical            
  Input Voltage   AC 90 -240V, 60Hz      
  Power Consumption Max. 22 Watts      
  Standby Power Less than 10 Watts      
  Size(WxHxD)   290x200x55mm       
  Weight   2.1kg